26
73VR31BLD USERS MANUAL EM-7397-C Rev.4
Reset conditions (F value calculation)
• Reset by trigger input
Click the right arrow to choose among Up, Down, ON and OFF. To disable the resetting by trigger input, specify None.
• Reset by analog input
Click the right arrow to choose between Value < Threshold and Value ≤ Threshold. To disable the resetting by analog
input, specify None.
With one of the conditions selected, choose also Input 2 tag name and the threshold value. In order to avoid frequent
start/reset operations due to instable analog input signal around the threshold value, specify also a deadband.
‘e‘ can be used to input an exponential value such as ‘1e9.’ Entering ‘e’ in any other way (e.g. ‘1ee’) will not be rec-
ognized as a numeral.
Threshold, Deadband
Max. 6 digits including a decimal point and minus sign
Reference temperature (T0), Z value
Specify T0 and Z for the F value calculation.
‘e‘ can be used to input an exponential value such as ‘1e9.’ Entering ‘e’ in any other way (e.g. ‘1ee’) will not be rec-
ognized as a numeral.
Reference temperature (T0), Z value
Max. 6 digits including a decimal point and minus sign
Storing rate
The storing rate is indicated (but not changed here) for the F value calculation. To change the storing rate, refer to
Section 2.2.1.
Sum scale for analog accumulation
Choose among None, Second, Minute, Hour and Day.
Plot position, Scale shift, Normal/Log, Overview color
Refer to Section 2.6.2.
Log 2 is not selectable for function pens.
