19
73VR31BLD USERS MANUAL EM-7397-C Rev.4
R3-PA2
Encoder pulse input
COUNT16
0 – 10000
0 – 100 kHz
0 – 10 kHz
0 – 1 kHz
0 – 100 Hz
0 – 10 Hz
0 – 1 Hz
0 – 0.1 Hz
COUNT32
0 – 1e8
0 – 100 000 000
R3-WTU
AC current input
0 to 100 percent
0 – 100%
-327.68 – 327.67 *
6
COUNT32
0 – 1e8
0 – 1e8 *
5
R3-WT4
R3-WT4A
R3-WT4B
AC current input
COUNT16
0 – 10000
0 – 10000
COUNT32
0 – 1e8
0 – 1e8 *
5
R3-MS4
R3(Y)-MS8
Potentiometer input
0 to 100 percent
0 – 100%
0 – 100%
R3-LC2
Strain gauge input
0 to 100 percent
0 – 100%
0 – 100%
R3-CZ4
Zero-phase current input
0 to 100 percent
0 – 100%
0 – 100%
R3-US4
DC Volt/Potentiometer input
0 to 100 percent
0 – 100%
0 – 100%
T/C RTD input
US4(Temp.)*
7
Same as meas. range
Refer to the specifications
sheet
*1. Not usable with the R3-SV8N or R3-SV16N.
*2. Not usable with the R3-SS8N.
*3. Set “0 - 100%” the scaling of input range conversion data with PC Configurator Software (model: R3CON).
*4. Max. count can be modified using the PC Configurator Software (model: R3CON). For the R3(Y)-PA16, do not modify to more than 32767.
When the count exceeds 32767, it will be an invalid number. Refer to Users Manual for the R3CON.
*4. Set 32 bit data as 1e8 with R3CON. For other value settings refer to the instruction manual for each I/O module.
*6. It is required to set up 16 bit data with R3CON being sure it does not surpasses the value of “-32768 to +32767.” At active energy count over, it
does not return to “0”, for this reason, do not use it for pulse accumulation function.
*7. To measure temperature with R3-US4 (T/C or RTD), select “US4(Temp.)” for Analog type in the Pen setting regardless of sensor type. Measur-
able range is not displayed when “US4(Temp.)” is selected. For measurable range, refer to the specification sheet of R3-US4.
MODEL
I/O TYPE
SELECTIONS
USABLE RANGE
MEASURABLE RANGE