2
www.m-locks.com
TANTUM BASIC / TANTUM MLS
1
IMPORTANT INSTRUCTIONS
• Before mounting the lock, please read the instructions for use carefully.
• Ensure that you
only
program the lock when the
safe is open
.
After changing the code, always try the code several times with the safe door open.
•
Only after several positive function tests (opening / closing) the safe door can be closed.
• Each key entry is confirmed by an audible tone and visual signal. These signals are not referred to in
the description that follows.
• You have a maximum of 10 seconds for each key entry. If you do not make an entry via the keypad
during this period of 10 seconds, the entry procedure will automatically abort. You then have to
start from the beginning.
• After entering a valid code, you will hear two audible tones. An invalid entry will trigger a long tone.
• If you accidentally enter an invalid code at the first attempt, you must wait 20 seconds before you
re-enter the code.
• Our products fulfil the EN1300 requirements regarding resistance against electrostatic charge.
In fact it may happen that the electrostatic charge of a user exceeds the extreme value many times.
That’s why we are asking you to touch the metal surface of the safe for discharging before
operating the lock.
!
The certifications of our locks are valid only if used together with the entry units indicated on the
respective certificates. As soon as an entry unit not specified on our certificates is used, the certifica-
tion of the lock expires immediately.
