M.J. MALLIS GROUP SIAT PAKLET SW2A+, Руководство пользователя

Страница: 11 / 32

5-INSTRUCTIONS FOR USE
In parameters set it’s possible to set and adjust the
speed of the carriage ascent and/or descent, it’s
possible also to setup the film overlapping measure.
Press next icon to enter the screen of the additional
rounds parameters.
In additional rounds parameters set it’s possible to
setup the additional wrapping rounds:
Down
Up
Carriage ascent quote for intermediate wrapping
rounds
Intermediate of reinforcement
Press next icon to move to page of film cut and pres-
sing unit enablement
On the pages of Parameters set it’s possible to adjust:
1 . Film cut enablement or disabling
2. Cutting time
(visualized only by choosing to enable
the cut by “YES”)
3. Welding time (visualized only by choosing to ena-
ble the cut by “YES”)
Welding function is active only if the selector “wel-
ding unit” (described on page 1) is placed on “1” .
The possible selector “welding unit” position change
during the performance of an automatic cycle IS
IGNORED as Plc stores the selector position before
the cycle start.
Set the desired temperature on the welder tempera-
ture adjuster (description on page. 1).
Press next in order to proceed with parameters set-
ting
May 2014 9
ENGLISH