F
ermenator
tm
** Optional Tri-Clamp Blow-off Kit **
Operation, Assembly, Maintenance Manual
Fits all Blichmann Engineering conicals
Congratulations on your purchase, and thank you for selecting the Fermenator
TM
stainless conical
fermentor from Blichmann Engineering. We are confident that it will provide you years of service and
many gallons of outstanding beer and wine. This manual will familiarize you with the use, assembly,
and the sanitation procedures for the product.
**** PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION ****
Unpacking:
Please ensure that you have the following items packaged with your blow-off kit. Note that some items
may have been preassembled for protection in shipment:
2
Gasket – 1” tri clamp, EPDM
2
1” tri-clamp clamps with wing nuts
1
1” tri-clamp 90 degree stainless steel elbow
1
Bulkhead nut (1” male thread X 1” tri clamp)
1
Bulkhead fitting (1” female thread X 1” tri clamp)
1
O-ring – bulkhead fitting (large)
1
Hose barb fitting – 1” tri clamp X 1” hose
1
Hose barb fitting –
1”
tri clamp X ½” hose
1
Tool – sanitary bulkhead (small washer with 3 bent tabs)
1
P-clip with nylock nut, bolt, 2 washers
1 Rubber
stopper
