M.J. MALLIS GROUP SIAT PAKLET SW2A+, Руководство пользователя

Страница: 6 / 32

5-INSTRUCTIONS FOR USE
By pressing the button START again the machine re-start
with the rising carriage that will wrap the protection top
sheet by fixing its flaps.
Once the load top limit is reached the carriage will reverse
its running by wrapping the load during the descent, too.
Wrapping only in ascent:
The machine wraps the rotating load only during the car-
riage ascent.
Once the pallet top limit is reached the turntable stops,
the carriage goes down till lower limit, after that the tur-
ntable performs 2 wrapping rounds for the film fixing.
Special cycle:
The machine performs a wrapping lap at the cycle begin-
ning to fix the film.During this initial phase the rotation
speed, the carriage ascent speed and the film tension are
fixed ( not adjustable by the operator).At the end of this
phase the machine performs a complete wrapping cycle
(ascent and descent) according to the parameters set by
the operator.At the end the machine will perform a phase
of cut/spreading and welding.
May 2014
4
ENGLISH