M-E BELL-270 RX, Инструкция по эксплуатации

Страница: 14 / 40

FUNCTION
By pressing a taught-in radio bell button, a radio signal is transmitted and
the Bell-270 RX plays a melody. The illuminated ring flashes for approx. 8
seconds in the set colour.
FIRST START-UP
Plug the Bell-270 RX into a free 230V mains socket and then operate the
associated transmitter to teach it in.
The code of the taught-in transmitter remains taught-in even if the
Bell-270 RX is not in a socket for a longer period of time.
TEACHING ADDITIONAL TRANSMITTERS
(max. 4 transmitters)
To teach an additional transmitter to the Bell-270 RX, press and hold the
CODE button (1) until the receiver emits a single beep.
You then have approx. 5 seconds to press the button of the new transmitter
to be learned.
If the learning process is successful, the Bell-270 RX will emit a melody. If
no transmitter is pressed within 5 seconds, the Bell-270 RX emits a double
beep and exits the learning process.
NOTE: A maximum of 4 different transmitters can be learned. If the Bell-
14
BELL- 270 RX
EN