M Design LUNA Series, Инструкция по установке и эксплуатации

Страница: 5 / 45

5
Instructions for installation and use TRUE VISION Gas
1. General remarks
This is an appliance using the closed combustion system, designed for the atmosphere
and comfort of your living-room. It constitutes an efficient source of heat and gives the
impression of a real fire.
The balanced flue appliances are based on the principle of natural extraction from the
firebox, which eliminates flue gas outside and brings in air (oxygen) from outside the
house which is necessary for combustion of the gas. It uses to this effect two concen-
tric pipes. The internal pipe ensures the elimination of burned gases and the external
pipe brings in combustion air. The advantage of this principle is that the equipment
works independently of the atmosphere which predominates in the house.
2. Connection
This appliance must be connected by an approved installer in accordance with the
most recent
regulations in force. On the basis of your order specifications, this appliance is designed
for natural or propane gas.
Read the instructions before installing and using this appliance. Before installing the
appliance, please check the local regulations about this type of appliance (identification
of the type of gas, etc.) and check that the furnace is adapted to your means of instal-
lationt.
It is imperative that the installer sees to the following:
•The appliance must be subject to an air tightness test of the gas and elimination of flue
gases.
•The concentric pipe, if already available, must be working correctly.
•The running of the control valve, lighting of the pilot light, the main burner and the
thermocouple must all be checked.
This appliance has been programmed and factory sealed. The sealed parts cannot be
modified. The appliance may therefore also be installed in airtight accommodation and
accommodation equipped with mechanical ventilation. It constitutes ambient heating
even in accommodation equipped with a closed ventilation system.
The appliance must be connected to the type of gas mentioned
on the appliance. Never connect a propane burner to natural gas
or vice versa!