M Design LUNA Series, Инструкция по установке и эксплуатации

Страница: 26 / 45

26
Instructions for installation and use TRUE VISION Gas
9. First-time user
The masonry and plaster surrounding a recently installed appliance holds a great deal
of moisture, which must first evaporate before commissioning the appliance. If not, the
plaster may crack or split. Ask your installer about the timescale to follow. The first time
you use it, only make a moderate-sized fire.
The first few times the appliance is used, an unpleasant odour may be apparent. It
comes from the protective paintwork. These emissions are totally harmless. To quickly
get rid of these odours, all you need to do is ventilate the room for a while.
After the first few fires, a light deposit may appear on the window. It comes from the
paintwork. Once the appliance is cold you can get rid of this deposit by using M De-
sign’s Bio-Clean cleaning product. This product may be used later on for cleaning the
window.
The appliance must not be used if the door no longer has a window or with the door
open. If the window is broken or cracked, the appliance must not be used until the
window has been replaced. Contact your M Design reseller.
10. Safety, dvice and maintenance
Have your appliance inspected once a year by a qualified technician.
Please observe the following points:
• Closed appliances produce intense heat, which means that all the surfaces of the
external walls (metal, door frames and windows) become very hot once a certain tem-
perature is reached. Make sure that young children do not touch the window; this
could result in severe burns.
• The logs, ceramic pebbles, a Diamond set and a Sapphire set are delivered with the
appliance. Never put other objects in the flames!
• Keep inflammable materials a suitable distance from the appliance (min. 1m)!
• Never modify the settings yourself! The furnace warranty will then be considered as
invalid, null and void.
• Never let children use the remote control without supervision.
• Always leave the pilot light on. The appliance is designed in order that the pilot light
goes out automatically every 24 hours and lights instantly. This enables the electronic
system to run down from static electricity.
• In the case where the burner goes out for any reason, wait for 3 minutes before re-
lighting the furnace.