M-Audio DCP-200 Скачать руководство пользователя

Страница: 69 / 77

User Guide

DCP-200

12 Technical Info

Caution

: Electro Static Discharge, Electrical Fast Transient and Conducted RF interference may cause the unit to

malfunction. In such case, unplug the unit and plug it in again to restore normal operation.

Note

: Your M-Audio product has been tested to comply with FCC Standards FOR HOME OR OFFICE USE.

Modifications not authorized by the manufacturer may void users authority to operate this device.

Note

: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

Содержание DCP-200














































































Результаты поиска

Содержание DCP-200

Отзывы:

Похожие инструкции для DCP-200

Бренды по названию

Популярные бренды

M-Audio DCP-200, Руководство пользователя

Результаты поиска

Содержание DCP-200

Отзывы:

Похожие инструкции для DCP-200

Бренды по названию

Популярные бренды