M-Audio DCP-200, Руководство пользователя

Страница: 15 / 77

User Guide
15
DCP-200
Using the Built-in Reverb
Your DCP-200 piano includes a built-in digital Reverb that can be used for adding a natural-sounding room
ambience to any of the piano’s eight voices.
To apply Reverb to a voice:
Press the Reverb button. The button will illuminate, and you will
hear the Reverb effect when you play the currently selected voice.
To turn Reverb off, press the Reverb button again. The button LED
will turn off to indicate that Reverb is no longer active.
To adjust the Reverb depth (Reverb amount):
1. Press and hold the Reverb button; the LED display will
change to show the current Reverb depth.
2. While holding the Reverb button, turn the Data Controller
knob (7) to adjust the reverb depth setting. The minimum
setting is 0, and the maximum setting is 127.
Once you have the desired amount of Reverb, let go of the
Reverb button, and resume playing DCP-200.
Each of the eight built-in voices will remember its
individual Reverb on/off status and depth setting, even
after turning the Power switch off and on.
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
MASTER VOLUME
PNo
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
64
MASTER VOLUME
1
2