Lynx L27-2, Руководство по эксплуатации и установке

Страница: 17 / 48

17
grilling rACKs
T
he easiest way to clean
the grill racks is to do so
immediately after turning off
the grill racks is to do so the grill racks is to do so
the burners, while they are
still hot. Wearing a long BBQ
mitt to protect your hand
from steam, dip a brass bristle
mitt to protect your hand mitt to protect your hand
brush in hot water and scrub
from steam, dip a brass bristle from steam, dip a brass bristle
the grill rack. dip the brush
frequently because the steam
the grill rack. the grill rack. ip the brush ip the brush
helps remove baked-on foods.
frequently because the steam frequently because the steam
Remove the racks and then
the briquette trays by lifting
the front edge and pulling
the briquette trays by lifting the briquette trays by lifting
them toward you.
the front edge and pulling the front edge and pulling
lip the trays
over and put
lip the trays lip the trays
them back in
over and put over and put
place over the
burner. Light
place over the place over the
the burners
and set them
to “hi” for 5
- 10 minutes
to burn the briquettes clean.
Any remaining food items can
to burn the briquettes clean. to burn the briquettes clean.
be brushed off using a soft
Any remaining food items can Any remaining food items can
brush.
Be sure the trays have com-
pletely cooled before reinstall
Be sure the trays have com Be sure the trays have com
-
ing them.
pletely cooled before reinstall pletely cooled before reinstall
Replacement briquette trays
can be ordered from Lynx or
Replacement briquette trays Replacement briquette trays
from your dealer.
can be ordered from Lynx or can be ordered from Lynx or
clean it with hot soapy water
or an oven-style cleaning
lean it with hot soapy water lean it with hot soapy water
product and re-install.
Also, check the tray after rain.
If you’ve left the grill
Also, check the tray after rain. Also, check the tray after rain.
uncovered, you may need to
remove the drip tray drain
plug to drain the water from
remove the drip tray drain remove the drip tray drain
the tray. The drain plug can
plug to drain the water from plug to drain the water from
be removed with a flat-head
the tray. The drain plug can the tray. The drain plug can
screwdriver.
warning
DO NOT ALLOW EXCESS
GREASE OR LIQUIDS TO
ACCUMULATE IN THE DRIP
TRAY AS THIS MAY CREATE
A FIRE HAZARD.
NEVER USE GRILL WITHOUT
DRIP TRAY PROPERLY IN-
STALLED
cERAmIc BRIQUETTES
T
he ceramic briquettes
normally burn off any accu
he ceramic briquettes he ceramic briquettes
-
mulated food drippings. But
normally burn off any accu normally burn off any accu
you may occasionally experi
mulated food drippings. But mulated food drippings. But
-
ence larger spills that don’t
you may occasionally experi you may occasionally experi
burn off under normal use.
ence larger spills that don’t ence larger spills that don’t
When this happens, let the
grill cool completely.
When this happens, let the When this happens, let the
mAIn BRASS BURnERS
m
ake sure the grill is com-
pletely cool before pro
ake sure the grill is com ake sure the grill is com
-
ceeding.
pletely cool before pro pletely cool before pro
Ensure that the gas supply is
off and all control knobs are in
Ensure that the gas supply is Ensure that the gas supply is
the “off” position.
to tt remove brass burners:
Remove the grill racks and
briquette trays.
Lift the burner up until the
legs exit the frame.
Lift the burner up until the Lift the burner up until the
Then pull to the rear of
the grill so the burner head
Then pull to the rear of Then pull to the rear of
comes off the brass orifice at
the grill so the burner head the grill so the burner head
1)
)
)
the front.
Angle the burner sideways
and lift it out.
Angle the burner sideways Angle the burner sideways
Be careful not to change the
air shutter position.
to Clean the tt brass burner:
To maximize grill perfor- To maximize grill perfor To maximize grill perfor
mance, clean the exterior of
To maximize grill perfor To maximize grill perfor
the burner with a wire brush.
Remove stubborn scale with a
metal scraper.
clear any clogged ports with a
straightened paper clip.
lear any clogged ports with a lear any clogged ports with a
never
use a wooden toothpick as
straightened paper clip. straightened paper clip.
it may break off and clog the
use a wooden toothpick as use a wooden toothpick as
port.
Shake out any debris through
the air shutter.
use a flashlight to inspect the
burner inlet to ensure it is not
se a flashlight to inspect the se a flashlight to inspect the
blocked. If obstructions can
be seen, clean it with a paper
clip or a pipe cleaner.
be seen, clean it with a paper be seen, clean it with a paper
)
warning
PROPER PLACEMENT OF
EACH BURNER IS CRITICAL.
AFTER CLEANING THEY
MUST BE CENTERED ON
THE BRASS ORIFICE, REST- THE BRASS ORIFICE, REST THE BRASS ORIFICE, REST
ING LEVEL WITHOUT ANY
ROCKING.
FAILURE TO MEET THESE
CONDITIONS MAY CAUSE
A VERY DANGEROUS CON-
DITION THAT CAN CAUSE
PERSONAL INJURY AND
PROPERTY DAMAGE.
Legs in slot
b
Legs in slot Legs in slot
urner sitting flat
Legs in slot Legs in slot
venturi all the way vv
into orifice
enturi all the way enturi all the way