Lynx L27-2, Руководство по эксплуатации и установке

Страница: 20 / 48

20
Wait a few seconds and
relite a burner.
bulk lP Cylinder users
bulk lP cylinder lines must
be properly regulated.
Ensure that you are using
a 4/11 appliance regulator
supplied by Lynx and
a 4/11 appliance regulator a 4/11 appliance regulator
converted to
supplied by Lynx and supplied by Lynx and
lP gas. Also
supplied by Lynx and supplied by Lynx and
ensure that you do not have
more than one regulator in
line.
natural gas units:
suPPly line
Ensure that the supply line is
at least 3/4” inside diameter
Ensure that the supply line is Ensure that the supply line is
or 1” outside diameter.
CheCK line CK CK Pressure
natural gas pressure should
be at least 7”
atural gas pressure should atural gas pressure should
w.C. and 4”
atural gas pressure should atural gas pressure should
W.c. pressure under full load
(with all burners on.)
. pressure under full load . pressure under full load
CheCK burners for CK CK
bloCKAges
chEcK f
K K LAmE chAR-
AcTERISTIcS.
(See IndEX:
“flame, Correct size” )
CleAn or AdjusT Air
ShUTTER
(see indeX: “Air
shutter Adjustment.”

►
►
►
►
►
►
low or InsuffICIent
heat
no PArT of The grill
should ever be lined
wiTh AluMinuM foil.
doing so will interfere with
airflow and can cause a low
oing so will interfere with oing so will interfere with
heat condition.
Ensure that you’ve preheated
the main burners for at
Ensure that you’ve preheated Ensure that you’ve preheated
least 10 to 15 minutes with
the hood closed and the
Prosear™ burner for 3
minutes.
Proper leveling during instal-
lation is critical. A grill that is
Proper leveling during instal- Proper leveling during instal-
out of level will cause erratic
lation is critical. A grill that is lation is critical. A grill that is
burner combustion and inef-
ficient, uneven heating. A
carpenter’s spirit level should
be used to level the grill both
carpenter’s spirit level should carpenter’s spirit level should
front-to-back and side-to-side.
be used to level the grill both be used to level the grill both
If the low heat problem
persists:
CheCK The gAs suPPly
line siZing require-
mEnTS.
)
CheCK The gAs suPPly
line for KinKs or
dAMAge.
rePlACe any damaged
supply lines.
CheCK The regulATor
make sure that the regulator
& hose assembly is the one
designed for and supplied
& hose assembly is the one & hose assembly is the one
with your Lynx grill and that
designed for and supplied designed for and supplied
►
►
►
A yellow flame on the main
burners indicates a lack of air.
A yellow flame on the main A yellow flame on the main
But, if the air around the grill
is dusty or if heavy grease is
But, if the air around the grill But, if the air around the grill
present, some orange tips on
the burner flame are normal.
present, some orange tips on present, some orange tips on
AdJUST ThE AIR ShUTTER
To adjust for insufficient air,
adjust the air shutter.
(See
indeX: “Air s
adjust the air shutter. adjust the air shutter.
hutter Adjustment” for
adjust the air shutter. adjust the air shutter.
further details.)
hutter Adjustment” for hutter Adjustment” for
►
it is correctly set up for the
type of fuel you are using.
it is correctly set up for the it is correctly set up for the
(see indeX: “regulator Conver-
sion” for further details.)
The hose and regulator
provided by Lynx must be
used if your grill is set-up for
provided by Lynx must be provided by Lynx must be
an lP g
used if your grill is set-up for used if your grill is set-up for
as Cylinder.
used if your grill is set-up for used if your grill is set-up for
check that there is no
physical pressure being
applied to the regulator
physical pressure being physical pressure being
attached to the back of the
applied to the regulator applied to the regulator
grill. The regulator contains
a flexible diaphragm and
grill. The regulator contains grill. The regulator contains
should not be allowed to
a flexible diaphragm and a flexible diaphragm and
touch the grill body or its
surroundings.
CheCK for obsTruC-
Tions
Ensure that the burners and
drip tray are clean and free
from obstructions.
drip tray are clean and free drip tray are clean and free
lP (Propane) units:
IS ThE cYLIndER
AlMosT eMPTy?
Almost-empty cylinders may
not have sufficient pressure
Almost-empty cylinders may Almost-empty cylinders may
to run the burners at high
not have sufficient pressure not have sufficient pressure
heat.
hAv A A E ThE LInE
Pressure CheCKed by
A QUALIfIEd TEchnI-
cIAn
(see indeX: “gas
requirements” for further
details.)
flow liMiTing deviCe
Improper lighting proce-
dures may have activated
Improper lighting proce Improper lighting proce
the lP cylinder’s flow control
dures may have activated dures may have activated
device, reducing the heat
output.
To reset the flow control:
Shut off all burner
controls and close the lP
cylinder valve.
wait 30 seconds and,
very slowly, reopen the
cylinder valve.
very slowly, reopen the very slowly, reopen the
►
►
►
►


wind hiTTing grill
Wind hitting the grill while in
use, especially winds blowing
into or across the hood gap
use, especially winds blowing use, especially winds blowing
from behind, can cause poor
into or across the hood gap into or across the hood gap
performance and in some
from behind, can cause poor from behind, can cause poor
cases can cause the control
performance and in some performance and in some
panel to get dangerously hot.
Steady or
gusty
winds can
prevent
the normal
prevent prevent
exhaust of
hot gases.
Locate your
grill
away
from prevailing
winds and avoid grilling in
from prevailing from prevailing
windy conditions.