greenMachine
®
titan Reference Manual - Rev 2.0
© 2019
LYNX
Technik
AG
Page 50 of 57
Supported HDMI Input Formats
The module has an HDMI input with automatic input detection. The module will detect the
following input standards and configure the input stage automatically for operation in the
connected format.
Scaler Function
The supported HDMI output standards are identical to the input standards. If you are using
the Scaler Function four further PC Formats are supported as listed below.
SDTV Formats
HDTV Formats
525 / 59.94Hz
1080i / 50Hz
625 / 50Hz
1080i / 59.94Hz
1080i / 60Hz
3GBit/s Formats
1080p / 23.98Hz
1080p / 50Hz
1080p / 24Hz
1080p / 59.94Hz
1080p / 25Hz
1080p / 60Hz
1080p / 29.97Hz
1080p / 30Hz
PC Formats (with Scaler Function)
720p / 25Hz
VGA (640x480)
720p / 29.97Hz
SVGA (800x600)
720p / 30Hz
XGA (1024x768)
720p / 50Hz
WXGA (1280x768)
720p / 59.94Hz
720p / 60Hz
4k Formats (HDMI 1.4b)
3840 x 2160p / 50Hz 4:2:0 8bit
3840 x 2160p / 59Hz 4:2:0 8bit
3840 x 2160p / 60Hz 4:2:0 8bit
As the synchronizer uses a single studio reference input both input signals should be the
same input frequency range (odd or even frame rate) as the reference for normal
operation.
The output format frequency (or frame rate) is determined by the connected reference
signal and the output will remain fixed to this reference regardless of the connected input
signals.