greenMachine
®
titan Reference Manual - Rev 2.0
© 2019
LYNX
Technik
AG
Page 15 of 57
Pressing the
Signals
button a third time will show the left hand side of a signal flow
overview of the module including the status indication of the video and reference inputs
and outputs. Pressing the
Signals
button a fourth time will pan to the right hand side of
this flow diagram.
When either the left or right hand side of the diagram is shown in the display, the rotary
push encoder can be used to pan between the left and right side.
Pressing the
Signals
button when the display shows the right hand side of the diagram
page will switch back to the Signal Chooser.
Detailed Signal Information
To get detailed information for a specific input (or output) signal simply press the signal
button (e.g. SDI 1) when in
Inputs (or Outputs)
mode (selected with Signal Chooser). The
chosen signal button will be illuminated more brightly than the other ones to indicate that
it is selected.
Detailed Input Monitoring
Signals
Display Navigation
