Lynx greenMachine titan, Справочное руководство

Страница: 29 / 57

greenMachine
®
titan Reference Manual - Rev 2.0
© 2019 LYNX Technik AG
Page 29 of 57
Main Subpage
Selecting the Main Subpage of the Control Page will show the processing flexGUI of the
greenMachine (picture below). Considering the possible complexity of the greenMachine,
we have decided to graphically represent the modules internal signal processing and
indicate the signal flow. To avoid too much information on one page it is split into a video
and an audio section. This provides an intuitive and logical method to access specific
areas of the device.
flexGUI with the 4K UPXDPXD Constellation deployed
For example, the picture above represents the graphical user interface of the 4KUPXD
Constellation (titan). The user interface of this device uses the flexGUI with its 3D
navigation. The idea is based on the concept of showing the functionality of a module as
a signal flow diagram. Parts of this signal flow diagram are the processing blocks.
The user can navigate around the module by double-clicking on a specific processing box
in the diagram. The software will then zoom into the selected processing block. From a
certain zoom level onwards, the surface of the processing block will dissolve and reveal
the controls. Double clicking anywhere outside of the processing block will zoom out again
to the next highest level showing for example the overview.
It is possible to freely navigate as well as zoom in and out within this module / system flow
diagram. There are two possibilities to do this.
1. Mouse
Using the mouse wheel will seamlessly zoom in and out. Rolling the mouse
wheel forward will zoom in to the position of the mouse curser and rolling it
backwards will zoom out. To navigate, simply click and hold anywhere outside
of a processing block and move the mouse.