18
3.3.2 Connection between the microphone units
H-9200/9510 series conference microphones of the H-9500M Fully Digital Conference System are daisy
chained easily.
When connecting to another unit, just connect the RJ45 connector on the 2 meter FTP cat 6 cable to any
Ethernet interface of the microphone unit.
3.3.3 Connection of the terminal unit
For H-9500 series digital conference system, The last microphone unit of each Ethernet output must connect
one terminal unit.
3.4 Operation
Before a meeting starts, the conference units need to be configured by the operator, include: coding and
testing. During the meeting, the participators use the conference unit to activate microphone, request to
speak, etc.
3.4.1 Microphone Coding
First of all, make sure that conference microphones are connected properly to the CMU. All conference
microphones must be coding when the system is used for the first time or when adding or replacing
conference microphones. The coding number can be activated by the menu operation on the CMU TFT
touch panel.
After selecting “Auto-coding” from the CMU TFT touch panel “Auto-coding” and the coding number will be
displayed on the IPS display and all the LED indicators on the microphone units connected will blink,
Microphone display will show “Press on/off key to set ID”. Now press the “Mic On/Off” key on the microphone
units one by one to the coding each unit, the button indicating light will be deactivated, microphone IPS
display also will show the microphone ID. Once all conference microphone unit finished coding, restart the
CMU to update the coding information.
When system under coding, please coding the conference microphones one by one and do not press
the “Mic On/Off” key of several conference microphones at the same time.