LY International Electronics H-9200 Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 43

LY International Electronics H-9200 Series Скачать руководство пользователя страница 18

17

Work State

Indicating light

Microphone On

Red (On)

Speaking time limit warning

Red (Flash)

Limited Mic

Green (Flash)

Request On

Green (Flash)

Autocoding

Red (Flash)



Noted: There has two gooseneck microphone options for the microphone unit, long one and short one.

⑤

Priority key (for chairman unit only). According to the priority mode configuration on the main unit. When

press and hold this key 1 second on chairman



If configured as “Mic Mute”, all active delegate microphones will be muted when this key pressed and

they will resume when pressed the on/off key to release this mode.



If configured as “Mic Off”, all active delegate microphones will be switched off when this key pressed

and they will resume when pressed the on/off key to release this mode.



Under “Request” mode, pressing this key will clear the request list



If chairman microphone is not active, pressing this key will activate it.

⑥

2.4 inch IPS: To display the microphone status and other information

⑦

Microphone socket to fix the gooseneck microphone

⑧

Ethernet interface: both Ethernet interface has same function, user can connect RJ45 connector to any
Ethernet interface if necessary

⑨

Microphone speaker monitor

⑩

Earphone jack 3.5mm

11

Microphone monitor speaker/earphone volume control

3.3 Connection

3.3.1 Connection to the CMU

The H-9200/9510 series microphone unit is equipped with a 2 meter long FTP cat6 cable with a standard
RJ45 connector. To connect to CMU, just connect the RJ45 connector of the first unit to the output of the H-
9500M main unit.
In case of a long distance between the conference unit and the CMU, use FTP Cat6 extension cable. Just
connect the RJ45 connector of the cable to the microphone unit and connect the other side to the output of
the main unit.

«
...
16
17
18
19
20
...
»

Содержание H-9200 Series












































Отзывы:

Нет отзывов