13
Chairman Priority: Chairman priority key has two functions (Mute All/Close All) when “Chairman Only”
function is active, all delegate microphones will be off or mute when priority key pressed (Delegate
microphone IPS display will show “Chairman Only”), and the delegate microphones will not reactivate
when their
MIC ON/OFF
key is pressed. These will remain excluded until the chairman again presses
the
MIC ON/OFF
key to release this mode.
f) Contrast (Menu B)
User can set the display contract with select it with and
g) Auto-coding (Menu B)
Each mic has a number ID which is affected (very important to setup the discuss, auto-track and voting
function), user can set the microphone id after setup the system.
This coding information is displayed on all the microphone LCD, press the on/off button of the
corresponding mic to the affected the number.
The other mics are always show the coding information but with an incremented number of a unit.
Please make sure the microphone id number should be different in one system
Please make sure the terminal unit connect to the last microphone of each line before auto-coding.
h) Recording (Menu B)
After connect USB flash disk to USB recording interface of the CMU, user can start audio recording, the
record file will save in the folder named “Record”, the file format is *.mp3. Please connect USB flash disk to
CMU at Menu A or Menu B interface, then enter recording interface, or CMU can not find the disk
