LXNAV LX80 Series, Руководство пользователя

Страница: 79 / 224

Rev # 23 Version 7.10 December 2019
Altitude warnings can be dismissed for 1 minute, 5 minutes or disabled.
Altitude warnings can be set for appro a ching from below a defined altitude or from above a
defined altitude.
5.1.9.3 FLARM Warnings
FLARM warnings will be raised only when the system is receiving FLARM data from an
internal or external FLARM module . Usi ng this dialogue, the user can define which warnings
will be shown and how they are going to be shown . There are three types of warnings:
•
Traffic warnings will be raised once a new aircraft is detected by FLARM.
•
Obstacles warnings will be displayed when a collision with a ground obstacle is
predicted. An o bstacles file should be loaded.
•
Alert zones are marked by ground stations to notify pilots of active parachute drop
zones, RC/RPAS/UAS flying areas or similar .
•
The Low alarms, Medium and High alarms combo box define alarm level s at which
system will d i splay collision warning s.
Explanation of alarms:
• Low alarms: For distant FLARM targets the main unit can give a short or long
message, just a beep or be turned off (19 - 25 seconds before possible collision).
•
Medium alarms:
For distant FLARM targets the mai n unit can give a short or long
message, just a beep or be turned off (14 - 18 seconds before possible collision).
•
High alarms:
For very close FLARM targets the main unit can give a short or long
message, just a beep or be turned off (6 - 8 seconds before pos s ible collision).