LXNAV LX80 Series, Руководство пользователя

Страница: 69 / 224

Rev # 23 Version 7.10 December 2019
5.1.6.8 Task
Use this dialogue to define how a task is drawn in task mode.
Task colour defines the colour of task lines. Obs.zone colour defines col o urs for
observation zones. Use the ZOOM selector knob to change transparency of area. 0 %
means completely transparent and only the outline will be drawn. 10 0% means completely
solid (not recommended). Wh en Show flown task is checked also the flown tas k will be
drawn. This might be useful when flying assigned area tasks.
The
Show selected zone only
item controls whether all task observation zones are to be
displayed or, if there is only one, then that alone will be shown.
When
Show optimal track
is en abled, a small blue arrow is drawn next to the aircraft.
This arrow indicates the optimal direction to fly.
AAT isolines are showing expected speed, delta time or expected distance, which means if
you turn to a next point at any of the line s , you will ha v e the result s indicated next to the
line based on the calculation to the next turn point zone.
AAT fill is filling the zone. The zone becomes transparent if you are “too early, too short or
task delta time is not 0”, if the zone is solid colour, you are already “too late, flew too long
in the zone or your task delta time is not achievable”.
AAT text colour is set by default to red, but it can be changed as well (colour and opacity).