LXNAV LX80 Series, Руководство пользователя

Страница: 152 / 224

Rev # 23 Version 7.10 December 2019
groundspeed and gate interval. Gate interval will repet every set amount of minutes and will
open the start for 1 minute each time.
Event procedure is a designated start procedure. Wait procedure defines time after
pressing the EVENT button and the time you can actually start. Start period defines how
long your start gate is opened. Wait after is a time until you can press again EVENT button
to repeat the procedure.
EVENT is forwarded to external devices as well.
EVENT pro cedure is not poss ible to test on the ground
Check Finish is 1000m below start when you are making a badge or record flight. If this
option is checked the system, it will not navigate y ou to the finish point elevation, but to t he
altitude which is going to be 1000m below the start altitude. If you have set the safety
altitude it will be added to this number (1000m + Safety altitude).
5.7.2.4.1 Gate Time
Gate time is the time when the start gate is going to open. If this value is entere d the
instrument will not give you any message about starting a task before the gate time is
reached. A notification will be given when the gate is opened.
5.7.2.4.2 Below Altitude Start Procedure
On some com petitions there is a rule that a pilot must be below a defined altitude for a
certain amount of time. Enter Below alt. and Below time to use this option. An
indication will be given on the final glide symbol. Character “ B ” will be displayed before the
M acCready value which indicates that the final glide is in below altitude mode.