Colibri II
– Flight recorder and navigation instrument
Page 5
Controls
There is one multifunction switch, the
navigation switch,
on the front of the unit
that is used to control the Colibri II. The
navigation switch
allows five motions:
- Move up or down
- Move left or right
- Push button (in) = Enter
Connectors
An USB Mini B type plug is located on the right bottom side of the unit and is used for external
power supply of the unit and for communication via the Colibri II power and data interface.
Note!
There is no USB port carried out, this means no direct communication from the Colibri II to a PC via USB.
It can only be used for external power in (5V max) and NMEA data out to external units.
SD card reader
The unit has an integral micro SD card reader positioned on the left side.
The SD card is used to:
-Upload TP (CUP format)
-Upload task (CUP format)
-Download flights from the internal memory (IGC format)
-Upload the flight declaration in LX format (.HDR )
Note!
Flight data is stored in the internal memory, so the SD card does not need to be inserted during flight.
