User Guide
12
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
CAUTION:
Pressing and holding the Reset button will remove any
custom confi gurations done to the XAP-1010.
4.3 Environmental Requirements
Ethernet cable at the electrical box installation location to provide Power and
Data to the XAP-1010.
A computer supporting TCP/IP and equipped with a Web browser. Supported
Web browser versions include Microsoft IE 8+, Firefox 4+, Safari 5+, Google
Chrome 5+. The Web browser is used to confi gure the XAP-1010.
The XAP-1010 uses 36-57VDC power. The POE injector power supply requires AC
100V ~ 240V, 50Hz ~ 60Hz.
Temperature of the operating environment: 32F~131F (0C~55C). Be sure to place
the access point away from heat generating devices.
Humidity of the operating environment: 5%-95% non-condensing. Do not place
the access point in an extremely dirty or damp location.
Keep the access point away from strong electromagnetic fi elds (i.e. Air
Conditioner compressors, fl uorescent light ballasts, CRT monitors/televisions,
etc.), and free from vibration, dust and direct sun light.
4.4 Hardware Installation
4.4.1 Access Point Placement
This XAP-1010 implements Luxul’s Circular Polarized
directional
antenna technol-
ogy. For maximum effi ciency, it should be
aimed
towards the area to which you
would like to provide coverage. With this in mind, the ideal placement option is
usually on an outside wall pointed into the coverage area; or in a multi-level instal-
lation, on the top fl oor ceiling pointed downwards.
