LuxCom OM1004 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 13

LuxCom OM1004 Скачать руководство пользователя страница 8

The main menu is shown below.

Ethernet Menu

The Ethernet menu is shown below:

OM1004 Ethernet Menu
1    Show ethernet status
2    Show switch interface and port registers
3    Show switch global registers
4    Show port packet statistics
Esc  Back
:>

This menu shows status and statistics for each port. The ports are plug and play, so there are no
configuration options. Ethernet menu item 1 shows the link status of all ports; items 2 and 3 are for
factory diagnostic use only; item 4 shows the traffic statistics for each port.

Here is a sample of the information available in this menu:

OM1004 Ethernet Menu
1    Show ethernet status
2    Show switch interface and port registers
3    Show switch global registers
4    Show port packet statistics
Esc  Back

:> 1

Ethernet Status

Port 1 2 3 4

Switch Port P1 P4 P6 P5

Type Electrical Optical Optical Optical

Media Copper Fiber Fiber Fiber

Link Good Yes No No No

Auto-Negotiation Enabled Enabled Enabled Enabled

Speed 100BASE-TX 1000BASE-X 1000BASE-X 1000BASE-X

Duplex Full-Duplex Not available Not available Not available

MDI/MDI-X MDI NA NA NA

:> 4

Enter switch port (1 - 6): 1

Packet Statistics for Port P1 (cleared when read)

InGoodOctestsLo: 1686, InGoodOctestsHI: 0

InBadOctets: 0, OutFCSErr: 0

InUnicast: 0, Deferred: 0

InBroadcasts: 22, InMulticasts: 0

64Octets: 22, 65 to 127Octets: 8

128 to 256Octets: 0, 256 to 511Octets: 0

512 to 1023Octets: 0, 1024 to MaxOctets: 0

OutOctetsLo: 512, OutOctetsHi: 0

OutUnicast: 0, Excessive: 0

OutMultcasts: 8, OutBroadcasts: 0

Single: 0, OutPause: 0

InPause: 0, Multiple: 0

InUndersize: 0, InFragments: 0

InOversize: 0, InJabber: 0

InRXErr: 0, InFCSerr: 0
Collisions: 0, Late: 0

5

«
...
6
7
8
9
10
...
»

Содержание OM1004














Отзывы:

Нет отзывов