LUX 115209, Оригинальное руководство пользователя, Страница: 26 / 74

26
Cleaning and maintenance
Cleaning
– Remove any coarse dirt.
– Clean the outside of the device with a damp
cloth.
Oil cutting tool
– Clean cutting tool with brush. Then, spray oil on
all sides of the cutting tool.
Charging the battery
►
P. 3, item 2
– Press in the locking button (7) and remove the
battery from the device.
– Plug power plug charger into power socket.
– Plug connector of the charger into battery as
shown.
– The charging status is displayed by the control
light (6):
– Control lamp lights red = Battery charging.
– Control lamp lights green = Battery fully
charged.
– Slot the battery pack into the device and make
sure it clicks into place correctly.
Troubleshooting
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the
vendor. You will save yourself a lot of trouble and
possibly money too.
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
Appliances which are labelled with the adja-
cent symbol must not be disposed of in
household waste. You must dispose of such
old electrical and electronic equipment sep-
arately.
– Please check with your local authority about the
possibilities for correct disposal.
Through separate disposal you send old equipment
for recycling or for other forms of re-use. You will
thus help to avoid in some cases that damaging
material gets into the environment.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
Disposal of batteries and accumulators
Disused batteries and accumulators do not
belong in domestic refuse; they must be dis-
posed of as prescribed by regulations.
– Bring batteries which are no longer usa-
ble to the battery collection point of the dealer or
of your local authority.
– Do not burn accumulators. Risk of explosion!
Technical data
NOTICE! Risk of damage to the device!
Do not submerge the device in water when
cleaning it since this would damage the
electrics.
NOTICE! Risk of damage to the device!
Do not use any sharp or abrasive objects,
or aggressive cleaning agents.
Do not use cleaning solutions.
CAUTION! Risk of injury!
Comply with all
safety instructions when handling
rechargeable devices.
NOTICE! Risk of damage to the unit!
Do
not allow the battery to deep discharge.
NOTICE! Risk of damage to the unit!
Do
not press the on/off switch after the device
has deactivated automatically.
Note:
The battery must be charged prior to
the first start-up. (Charging period:
►
Technical data – p. 26).
Note:
The Li-Ion battery can be charged at
any time without affect the lifetime of the
battery. Interrupting the charging process
will not damage the battery.
DANGER! Risk of injury!
Unprofessional
repairs may mean that your unit will no
longer operate safely. This endangers you
and your environment.
Error/Fault Cause Remedy
Device does not work. Battery pack discharged?
►
Charging the battery – p. 26
Battery pack defective? Contact your local vendor.
Is the device defective?
Item number 115 209 115 210
Idle revolutions 1000 min
-1
1000 min
-1
GB
Kantenschneider_heckenschere_115209_115210.book Seite 26 Mittwoch, 14. Oktober 2015 2:33 14