LUX 115209, Оригинальное руководство пользователя, Страница: 24 / 74

24
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following
the tips below:
– Maintain the device in accordance with the
instructions in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your
hands, in particular, are kept warm.
– Take regular breaks and move your hands at the
same time to promote circulation.
Handling rechargeable devices
• Danger of fire! Only use batteries approved by
the manufacturer. Only use chargers approved
by the manufacturer. Keep battery away from
metal objects that could cause short circuiting
when not in use. There is a risk of injuries and
fires.
• Prior to connecting the charger, verify that the
power supply connection corresponds with the
connecting data of the device.
• The fuse must be a residual current circuit-
breaker with a measured residual current of no
more than 30 mA.
• Only charge the battery in closed rooms.
• Ensure that the device is switched off before
installing the battery.
• Never switch on the device during the charging
process.
• Fluid can escape from the battery when used
incorrectly. Battery fluid may result in skin irrita-
tions and burns. Avoid contact! In the event of
accidental contact, rinse thoroughly with water.
Immediately seek the aid of a physician in the
event of eye contact.
Device-specific safety instructions
• Keep all body parts away from the cutting unit.
• Juveniles under the age of 16 and users who are
not familiar with operating the device are not
allowed to use it.
• Make sure you are positioned firmly and with a
natural stance when working with the device.
• Never attempt to remove cut material or hold
onto material being cut while the knife is operat-
ing. Remove cut materials that are jammed only
after the device has been switched off.
• Only work with good light and visibility.
• Never work at above head level! Do not bend for-
wards or lean over backwards!
• Pay attention when walking backwards. Danger
of stumbling!
• Never work in the rain.
• Carry the device by its handle with stationary
blade and applied blade guard. Only store
device in the case.
• Always hold the unit tightly with both hands.
• Make sure there are no stray animals or objects
in the area before starting work. Remove any
objects that may be catapulted from or jammed
in the cutting unit.
• The clothing of the operator should be close-fit-
ting. Avoid wearing loosely fitting clothing. Wear
sturdy footwear and long work trousers.
• Remember that moving parts may also be
located behind ventilation and venting slots.
• Symbols affixed to your tools may not be
removed or covered. Information on the device
that is no longer legible must be replaced imme-
diately.
Personal protective clothing
Your device at a glance
►
P. 3, item 1
1. Cutting equipment
2. Start-up protection
3. Battery pack
4. On/Off switch
►
P. 3, item 2
5. Power plug charger
6. Control light
7. Locking button
Only for 115 210
►
P. 4, item 3
Read the operating manual before using the
device
Be careful when handling the device! Ob-
serve all safety instructions in the instruc-
tions for use!
Protect the device from wet conditions.
Store in a dry location.
Touch parts only then when they are com-
pletely stopped.
Do not expose the battery pack to sunlight
or increased temperatures!
Do not dispose of a battery pack in water!
Do not dispose of a battery pack with the
household waste!
Do not burn the battery pack!
Wear safety glasses when working with the
device.
Wear ear defenders when working with the
device.
When working with the tool wear sturdy
footwear.
Wear safety gloves when working with the
device.
Wear tight fitting clothes when working with
the device.
GB
Kantenschneider_heckenschere_115209_115210.book Seite 24 Mittwoch, 14. Oktober 2015 2:33 14