Lux Tools 451 121, Инструкция по эксплуатации

Страница: 8 / 16

8
Technical data
*) The specified values are emission values and do not necessar-
ily represent safe workplace values. Although there is a corre-
lation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary
or not. Factors which affect the current immission levels at the
workplace, include the type of room, other sources of noise,
e. g. the number of machines operating and other processes
taking place in the vicinity. Permitted workplace values can dif-
fer from country to country. This information is designed to help
the user to better assess the dangers and risks.
**) The specified vibration emission value was measured in
accordance with a normed test procedure and can be used in
order to compare one tool with another. The specified vibration
emission value can also be used for an introductory evaluation
of the exposure. The vibration emission value may fluctuate
from the specified value during actual use of the power tool.
These fluctuations will depend on the way in which the power
tool is used. Try to keep vibrations to a minimum. One method
of reducing the vibration load is, for example, limiting the length
of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also
including times in which the power tool is switched off and
times in which it is switched on, but is running without load).
Part number 451 121
Rated voltage 220-240 V~, 50 Hz
Capacity 710 W
Protection class II
Nominal revolutions 0–930 min
−1
Hammer rate 0–5130 min
−1
Impact energy 2,6 J
Tool receiving socket SDS
Max. drill chuck diameter
• Concrete
• Steel
• Wood
26 mm
13 mm
40 mm
Sound power level (L
WA
)*
(hammer drilling)
101,23 dB(A)
(K = 3 dB(A))
Sound pressure level (L
PA
)*
(hammer drilling)
90,23 dB(A)
(K = 3 dB(A))
Sound power level (L
WA
)*
(chiseling)
106,33 dB(A)
(K = 3 dB(A))
Sound pressure level (L
PA
)*
(chiseling)
95,33 dB(A)
(K = 3 dB(A))
Vibration** ah,HD = 21,54 m/s²
ah,Cheq = 26,368 m/s²
(K = 1,5 m/s²)
GB
Bohrhammer_451121.book Seite 8 Donnerstag, 17. September 2015 8:08 08