Luvion ICON CLEAR 70, Инструкция по эксплуатации

Страница: 9 / 30

9 LUVION
Premium Baby products
lower than those, you’ll hear a beep.
3.4 List of tones
Your baby monitor can produce various tones. They have the following meaning:
TONE MEANING
Single tone Confi rmation (for example, saving a setting).
Fast double tone Error (for example, trying to change the
volume but already reached maximum).
Fast triple tone System alert (for example, link lost or
battery low).
You can turn off user alert tones by pressing any button on the Parent unit.
3.5 Resetting the units
Resetting either units means they’ll return to the settings they came with.
1.
Make sure the unit you’re resetting is switched off .
2.
Switch it back on again by pressing and holding the button down .
3. Within four seconds of turning the power back on, press and hold the button
for at least a second. You should only reset if you’re having problems with your
baby monitor.
TROUBLESHOOTING
Troubleshooting
Why is the Parent unit beeping? Take a look at 3.4 for a list of the tones the Parent unit
makes. It could be
beeping for a few diff erent reasons.
• The link has been lost between your units.
Check that the Baby unit Link indicator is illu-
minated. If not, make sure the power adapter
is still connected.
• The batteries are low. See 1.2. If the Parent unit
still beeps after this, try switching the Baby
unit off at the mains power socket and remov-
ing the batteries for around 30 minutes. Make
sure the Parent unit is clean by wiping with a
damp cloth. If this doesn’t work, contact Luvion
customer service.
EN