Luvion Grand Elite 2, Инструкция по эксплуатации

Страница: 18 / 86

GRAND ELITE 2
Premium Babymonitor 18
EN
press and hold the PAIR key until the LED light fl ashes.
6. If unsuccessful, delete the camera channel as per 5.6.1 on page 17, and attempt to
pair again.
· NOTE
A Camera Unit can only be registered to one Monitor Unit at any one time.
5.6.3 View a camera
1. Press the MENU button and the menu bar will pop up.
2. 2. Press the LEFT button or RIGHT button until Cam icon is highlighted, and
the del / add / New / scan menu will pop up.
3. Press the UP button or DOWN button to select
VIEW
icon, and press the OK
button to confi rm.
4. cam 1 / cam 2 / cam 3 / cam 4
will pop up, press the UP button or DOWN
button to select the desired Camera Unit to view.
· TIP: QUICK METHOD TO CYCLE THROUGH CAM CHANNELS
Quick method to view desired camera instead of entering into the menu bar: directly
press the OK button to cycle through paired cameras: cam 1 / cam 2 / cam 3 / cam 4 /
scan(x).
5.6.4 Scan camera
This function automatically cycles through your paired camera channels to display each
camera for 10 seconds. This function is only useful if you have more than 1 Camera Unit
paired.
1. Press the MENU button and the menu bar will pop up.
2. Press the LEFT button or RIGHT button untill CAM icon is highlighted, and
the del/add/view/scan menu will pop up.
3. Press the UP button or DOWN button to select SCAN icon, and press the OK
button to confi rm.
4. The screen will then display the video from diff erent paired cameras in a loop of
cam 1 / cam 2 / cam 3 / cam 4
, changing every 12 seconds.
· NOTE
When in Scan mode, the Monitor Unit will stop scanning and alert you if one of the