Lutz DMP 1, Руководство по эксплуатации

Страница: 27 / 32

D GB
27
16. While continuing to apply pressure to spring clip assembly, screw short half of diaphragm
rod (item 11) into long half.
17. Follow instructions for assembly of diaphragm in step 9. Final tightening of diaphragm
rod will occur when outer diaphragm plates are tightened.
18. Make sure valve plug o-ring (item 21) is well lubed, position o-ring and press air valve
plug into the intermediate making sure that tab and indentation are aligned. If o-ring is
not well lubricated, it will not permit reinsertion.
19. Follow procedure for final assembly of pump in step 6.