Lutz DMP 1, Руководство по эксплуатации

Страница: 17 / 32

D
General safety information
Read these warnings and safety precautions prior to installation or operation. Failure to comply
with these instructions could result in personal injury and or property damage. Retain these
instructions for future reference.
Warning
Before replacing the pump in service make certain it is compatible with the fluid being
pumped. Changes of temperature, concentrations or combinations of chemicals may
vary resistance of material. Always consult Material Safety Data Sheets and Enginee-
ring Resistance Tables for chemical compatibility.
L
Be certain all operators of this equipment have been trained for safe working practices.
Danger: Hazardous Material
Protective eye wear and clothing should be used whenever pumping hazardous or
toxic fluids.
L
If a diaphragm ruptures, the pumped product can enter the air side of the pump and
exit through the air exhaust. When the fluid is hazardous pipe exhaust away from
the work area and personnel.
L
When the fluid source is at a higher level than the pump (flooded suction), the
exhaust should be piped to a higher level than the fluid source to prevent spills
caused by siphoning if a diaphragm rupture should occur.
Danger: Hazardous Pressure
Do not clean or service pump, hoses or dispensing valves when the system is
pressurized – serious injury may result.
L
Disconnect air supply line and relieve pressure from the system prior to disassembly.
GB
17