Lutz-Jesco MEMDOS SMART LB Скачать руководство пользователя страница 33

Страница: 33 / 48

Operation

Transportation

Stepper Motor-driven Diaphragm Dosing Pump

MEMDOS SMART LB

Operating Instructions

BA-10100-02-V02

11.6 Transportation

Perform the following working steps:



The unit should be thoroughly cleaned. Any dangerous dosing media
must be additionally neutralised and decontaminated.



All accessories should be dismantled.



All openings should be closed, so that no foreign objects can get into
the system.



The dosing pump must be suitably packed, preferably in the original
packing, and transportation.

Should the unit be sent back to the manufacturer, please follow chap-
ters ”Declaration of harmlessness“ (see page 42) and ”Warranty appli-
cation“ (see page 44).

11.7 Disposal of old units



The waste unit must be thoroughly cleaned. Any dangerous dosing
media must be additionally neutralised and decontaminated.



Any residual dosing media must be removed in a professional
manner.



The dosing pump must be disposed of in accordance with appli-
cable local laws and regulations. The unit does not belong to house-
hold waste!



As the disposal regulations may differ from country to country in the
European Union, please consult your supplier if necessary.
In Germany, the manufacturer must provide free-of-charge disposal
provided the unit has been sent in a safe manner.

Содержание MEMDOS SMART LB

















































Результаты поиска

Содержание MEMDOS SMART LB

Отзывы:

Похожие инструкции для MEMDOS SMART LB

Бренды по названию

Популярные бренды

Lutz-Jesco MEMDOS SMART LB, Руководство по эксплуатации

Результаты поиска

Содержание MEMDOS SMART LB

Отзывы:

Похожие инструкции для MEMDOS SMART LB

Бренды по названию

Популярные бренды