Lutz-Jesco MEMDOS SMART LB, Руководство по эксплуатации

Страница: 28 / 48

Electrical installation
Description of the connection socket
28
Stepper Motor-driven Diaphragm Dosing Pump MEMDOS SMART LB
© Lutz-Jesco GmbH 2014
Operating Instructions
BA-10100-02-V02
9.2 Description of the connection socket
Fig. 9-2: Connection socket
9.2.1 Connection socket 1
9.2.1.1 Release input
Using the Release input, it is possible to start or stop the dosing pump
externally.

Potential-free contact

Assignment of pin 3, 4
* Applies to cable colours of cables from Lutz-Jesco GmbH. No liability
is accepted for cables from other manufacturers.
Removing the conductive rubber band
Fig. 9-3: Conductive rubber band in connection socket 1
Remove the conductive rubber band before inserting the cable in the
connection socket.
After the cable has been removed, the conductive rubber band must be
reinserted in the connection socket. Insert it between pins 1, 2 and 3, 4
as shown in fig. 9-3.
Input Connection socket
Release input 1
Table 9-1: Description of the connection socket
Pin M12x1
(A-coded)
Assignments Connection Cable colour*
1 - - Brown BN
2 - White WH
3 Ground (GND) Blue BU
4 External On/Off Black BK
Table 9-2: Connection socket 1
3
4