Control
Explanation of the menu icons
26
© Lutz-Jesco GmbH 2017
BA-10010-02-V01
Solenoid-diaphragm dosing pump
MAGDOS LA / LD
Operating instructions
2.
Use the
+
and
-
keys to set a value from 0 to 9 for the first digit of the
code and then press
→
.
3.
Proceed as described under point 2 for the other digits.
4.
Choose the last point
and press
+
.
5.
Press
OK
.
4
The dosing pump now displays the corresponding symbol:
0%
Fig. 22: Start screen with activated password protection
ü
Password protection activated.
10.2.5.1 Entering the password
Once you press any key, you must enter the password. If you enter the
code correctly, you have 120 seconds in which to operate the dosing
pump. When the 120 seconds have elapsed, you must re-enter the code,
even if you are in the middle of making another entry (this does not
include settings in the menus).
Fig. 23:
4 3 2 1
OK - +
Entering the Release code
1.
Use the
+
and
-
keys to set a value from 0 to 9 for the first digit of the
code and then press
→
.
2.
Proceed as described under point 1 for the other digits.
3.
After entering all the digits, press
OK
.
4
If your input is correct, the dosing pump displays the start screen.
i
If you have forgotten the code, please contact Lutz-Jesco
GmbH.
ü
Enter the code.
10.2.5.2 Deactivating the password protection
1.
Press
+
and
-
simultaneously.
2.
Press
→
until is selected.
3.
Press
-
.
4.
Press
OK
.
ü
Password protection deactivated.
Содержание MAGDOS LA
Страница 2: ......
