Lutron Electronics Serena CS-EDU3-SYJ Скачать руководство пользователя страница 13

Страница: 13 / 19

Shading Solutions

4-Group RF Remote Control

Models CS-YJ-4GC-WH, CS-YK-4GC-WH • Setup Guide—Please Read Before Operating

English

Lutron Electronics Co., Inc.

7200 Suter Road

Coopersburg, PA 18036-1299, U.S.A.

02/2015

P/N 045411 Rev. D

Lutron,

, Serena, Sivoia, Triathlon, HomeWorks, and RadioRA are registered trademarks of Lutron Electronics Co., Inc.

Device Description

Assignment to Lutron

Window Treatments

Equipped with Sivoia

QS Wireless RF Receiver

Assignment to a Serena

or Sivoia

QS Triathlon

Shade

Removing and changing Shade Group assignments:

Setting a Serena

or Sivoia

QS Triathlon

Shade Favorite Level

Setting or Adjusting Serena

or Sivoia

QS Triathlon

Shade Limits

Models: CS-YJ-4GC-WH, CS-YK-4GC-WH
3 V

50 mA

The Lutron

4-Group RF remote control is a flexible and easy to use

device that allows the user to control Lutron

wireless shades from

anywhere in the space. This battery-operated control requires no
external power or communication wiring.

• Provides control of Lutron

shades in the following systems:

– Standalone

Serena

RF Remote Control Honeycomb and Roller Shades

Sivoia

QS Triathlon

Honeycomb and Roller Shades

Sivoia

QS Wireless shades

– HomeWorks

QS systems (CS-YJ-4GC-WH only)

– RadioRA

2 systems (CS-YJ-4GC-WH only)

– Lutron

Smart Bridge (CS-YJ-4GC-WH only)

• Battery-powered; requires no wiring
• Backlit buttons clearly indicate which Shade Group is selected
• 7-year battery life (two AAA alkaline batteries included)

Open button

Tap once: shade

opens to its upper limit

Close button

Tap once: shade

closes to its lower limit

All Shades

button

Tap once to select

all shades

Raise & Lower

buttons

Press and hold to

move the shade

Favorite button

Tap once to move

the shade to a

favorite position

LED ON

LED FLASHING

2. The Shade button

illuminates.

LED ON

LED FLASHING

2. The Shade button

illuminates.

LED ON

LED FLASHING

4. The Shade

button flashes.

Assignment is

complete.

5. Repeat for

additional

shade/control

assignments.

6. Repeat steps 1 through 5 for additional

shades/groups to be assigned.

3. Choose a Shade Group

button. Press and hold.

1. Tap the Shade button.

Honeycomb

Roller

1. Tap the Shade button.

Honeycomb

Roller

3. Press and hold the Open

and Raise buttons.

4. The Shade button

flashes, then

stays on.

LED ON

LED FLASHING

LED ON

LED FLASHING

5. Use the Raise and Lower buttons

to position the shade at the

preferred upper or lower limit.

LED ON

LED FLASHING

7. The Shade button

flashes. Limit set

is complete.

SET UPPER LIMIT

With the shade at the

preferred upper limit, press

and hold the Open button.

SET LOWER LIMIT

With the shade at the

preferred lower limit,

press and hold the

Close button.

3. Press and hold the

Favorite button.

2. Use the Raise and Lower

buttons to position the

shade(s) at the desired

favorite level.

LED ON

LED FLASHING

4. The Shade button

of each shade in

the active Shade

Group flashes.

Favorite level is set.

1. Press and hold the device drive’s

Open

button.

Before starting, verify that the device

drive LED is OFF, and the window

treatment is positioned at its Open Limit.

If the LED is illuminated, tap the drive’s

Open

button. The LED will turn off.

IMPORTANT:

The Favorite Level

function applies to Shade Groups.

•

An individual Favorite Level can be

set for each of the 4 Shade Groups.

•

A 5th Favorite Level can be set for

All Shades.

•

A shade that belongs to multiple

groups will move to the Favorite

Level set for the Shade Group that

is active when the Favorite button

is pressed.

LED OFF

3. Tap the device drive’s

button

(arrow button next to the LED).

4. The device drive and wireless receiver

are in assignment mode, with LED’s

flashing every 4 seconds.

2. The drive LED flashes, then stays

on. Release the Open

button.

5. Choose a Shade Group button. Press and hold for

5 seconds.

The window treatment(s) will move a short distance

or “wiggle,” confirming successful assignment.

LED ON

LED FLASHING

LED ON

LED FLASHING

LED ON

LED FLASHING

LED ON

LED FLASHING

LED ON

LED FLASHING

LED ON

LED FLASHING

LED ON

LED FLASHING

LED ON

LED FLASHING

Shade Group

buttons

Tap once to select

shades assigned to

the corresponding

group (number)

The Lutron

4-Group RF remote control

is safe for use around baths and spas.

NOTICE:

DO NOT

submerge in water.

To remove the assignment of a particular shade to a Shade Group button, restore the shade to its factory default settings according to the instructions
included with the shade.

To change the Shade Group button to which a particular shade is assigned, follow step a. above to remove the original assignment, then follow the
steps under Assignment to a Serena

or Sivoia

QS Triathlon

Shade, and choose a different Shade Group button at step 3.

To remove the assignment of a window treatment to a Shade
Group button, restore the device drive to its factory default settings
according to the instructions included with the window treatment.

To change the Shade Group button to which a particular device is
assigned, follow step a. above to remove the original assignment,
then follow the steps under Assignment to Lutron

Window

Treatments Equipped with Sivoia

QS Wireless RF Receiver, and

choose a different Shade Group button at step 5.

1. Tap the desired Shade

Group button or the

All Shades button.

• This setup guide provides basic instructions for assigning and using the Lutron

4-Group RF Remote Control with Lutron

shade products in stand-alone applications.

• To assign and use the remote control in a RadioRA

2 system, use the RadioRA