Luraco iRobotics 6, Руководство пользователя

Страница: 8 / 20

Step 2: Assemble the moving wheels
Step 3: Assemble the casing of seat frame
Incline the chair main body forward to one side about 20 degrees (Fig. 3). Loosen the two screws of rubber pad at
bottom of the seat frame (Fig. 2). Remove completely screw at center. Finally align the bottom of seat frame casing
with the rubber pad and fasten the casing to the frame (Fig. 3).
Step 4: Assemble the backrest
1/ Fix the back to the locked upright position raise seat back until you hear a click.
2/ Connect two wires from Mother board to the Backrest.
7
Fig. 2 : Use Screw driver to loosen and tighten
screws as shown.
Fig. 1 : Three screws are on sections as indicated
with red circle above.
Fig. 3 : Once loosened, add casing and then
tighten screws to casing and frame.
Center
screw
Insert lock
Insert wheel
Mother
board
cover