Luraco iRobotics 6, Руководство пользователя

Страница: 16 / 20

LED Color/Function Meaning
Power ( Blue) Blue is good. This LED should be on continuously
Remote Control (Yellow)
If this yellow LED is on, it means that remote has technical
issue
Up/Down Sensors (Red)
If this red LED is on, it means that vertical limit sensors are
having a problem
Overloaded (Red)
If this red LED is on, it means that mechanism up/down
motor is overloaded
MAINTENANCE INSTRUCTION
This product does not require any lubrication for the mechanical parts in the system.
Use only leather care products for cleaning and maintaining the leather.
Trouble Shooting Guide
15
Problem/Issue Possible Cause Trouble Shooting Method
Does not work after powered
up
1. Power switch is not turned on
2. Bad connection between power
plug and socket
3. Massage remote is not turned on
4. Broken power cord or plug
5. Bad fuse
6. Control unit does not function
properly 1. Turn power switch On (on the
back)
2. Connect power cord again
3. Press power button on remote
4. Request manufacturer or service
technician to replace power cord
5. Replace the fuse with exact
specifications
6. Contact Technical Support of the
manufacturer if it continues.
Sounds like tapping or
humming sounds Sounds from air pump, motor, or other
mechanical parts
Normal phenomenon
Roller height changes Rollers work alternately Normal phenomenon
Abnormal sounds while
working
Maybe from over working the massage
mechanism 1. Cut down on usage (no more
than 20 minutes per session)
2. Contact Technical Support of the
manufacturer if it continues
Suddenly stops working
1. Bad power connection
2. Auto program timer is up 1. unplug and reinsert power cord to
the chair
2. Normal operation
Can not recline the chair
Obstruction-be sure that chair is
allowed enough room to fully recline Stop chair operation, and move
obstruction
Can not restore position after
reclining
Bad connection.
Contact Technical Support of the
manufacturer if it continues
Remote control is hot or
overheats
Over recommended usage Use only 20 minutes per session
Abnormal overheating from
power wire or plug
1. System is overloaded
2. Other unknown causes 1. Cut down usage (no more than
20 minutes per session)
2. Contact Technical Support of the
manufacturer if it continues