Lupus Electronics LUPUSTEC LE800 D1, Руководство пользователя, Страница: 143 / 180

46
ENGL
IS
H
5.10 Utility Setup
Item Description
HDD Initialization Select to enter hard disk initialization menu. Please stop recording
before entering this menu. Enter the menu, system will show all the
data (model/ volume) of HDD that is installed in the DVR. Check the HDD
you’d like to initialize, then press “Start”. HDD initialization is successful
when the status shows “Succeed”.
USB Initialization
Clean up all data on USB. Enter USB initialization and press “YES” to
clean up all data on your USB. The initialization is done when it shows
“Succeed”.
Set System to Default Restore system default values.
Reset System Events Delete all DVR log entries.
Copy Setup to USB Copy configuration to a USB device. There will be a file named
“sdvr.config” on your USB.
Download Setup from USB
Download configuration from a USB device into DVR.
Ugrade Upgrade Firmware of DVR from USB Stick.