Lupus Electronics LUPUSTEC LE800 D1, Руководство пользователя, Страница: 142 / 180

45
ENGL
IS
H
Key Tone Enable/ Disable keystrokes.
ALARM BUZZER
Enable/ Disable buzzer operation when the alarm is triggered for HDD
error, sensor, motion and vloss (Video Loss).
ALARM RELAY
Enable/ Disable the signal to be sent to the RELAY OUT blocks when the
alarm is triggered for HDD error, sensor, motion and vloss.
5.9.4 Spot Monitor Setup
The LE800 D1 provides two ways of displaying video images: One option are the two main monitor output
ports, which provide split screen display and full access to all parameters and functions. The other option is
the spot monitor output: It provides the possibility to show fullscreen images of the channels in intervall mode.
The intervall time can be adjusted as you choose. To use this function, you have to connect a display to the
spot monitor output port on the back of your device.
Item Description
Activate Spot Activates the Spot-Function for the Main/Spot BNC Output
SPOT MODE
Channels display in spot for three different modes:
MANUAL: Select channels to display manually, select channels will
be transfered to the SPOT monitor.
SEQUENCE: Auto-sequence for all channels in order.
EVENT: Display channels with event occurred.
Interval (Seconds)
The duration interval time between channels is in seconds under SPOT
mode (can not be set to 0 seconds).
Skip Video Loss Channel Whether to skip channels without video signal.
Channel Activates the selected channel for the spot function