34
35
Piko
Piko
Engli
sh
2
2
1
2
3
1
2
For mounting the Piko on a handlebar, two
optional CNC Quick Release mounts are available.
Have a look at
www.lupine.de
(Art.No. 225 for
Ø 25.4 mm/Art.No. 231 for Ø 31.8 mm)
Handlebar mounting:
Put the clamp around the
handle bar and close.
For mounting, please first loosen the screws on the
helmet mount/headband.
Only one screw and the
additionally supplied black o-rings are required
for mounting the Piko on the bar.
Change the blue
o-ring to a black one on the screw. Put the screw
through the hole of the handlebar mount, then put
the second black o-ring onto the tip of the screw.
The order of o-ring, screw, o-ring, handlebar mount,
lamp must be strictly adhered to as shown in the
picture in order to ensure flawless functionality.
After that, tighten the screw slightly first, then secu-
rely. Cover the open thread with the included plug.
How to mount the Piko on a
handlebar can also be watched
in a video provided on our
website in the support section!
Mounting
Your battery is supplied with
both a short and a long Velcro
strap, coated with an anti-slip
material to ensure a secure
mount. Use the strap which
most closely matches your
tube size.
Battery mounting
For a demonstration of how to mount the
battery on a bicycle frame, see the video
on our Website (click “Support”).
