Luneau Technology Briot emotion2, Инструкция по эксплуатации, Страница: 62 / 162

Using your Edger...Usual procedure
3-61 LTO
3.2.8.5.1 P
RODUCING A JOB WITH RIMLESS FINISHING
3.2.8.5.1.1 Object
Produce a job with the following characteristics:
Polycarbonate > Normal lens > Rimless finishing > No safety-bevel > Polishing
3.2.8.5.1.2 Procedure
To carry out the job described above, proceed as follows:
Flow chart 3-3 : Production of a job with rimless finishing
Screen 3-31 : Example of the production of a job with rimless finishing
Create a Job in the creation interface.
Select POYCARBONATE lens material.
Select NORMAL lens type.
Select RIMLESS finishing type.
Select POLISHING option.
Place the lens in the edging chamber.
Start the edging process.
Select NO SAFETY-BEVEL.
Tighten the lens.
Polycarbonate lens
Rimless
Normal Type
With polishing
Without 
safety-bevel
Start the 
edging process