Luneau Technology Briot emotion2, Инструкция по эксплуатации

Страница: 118 / 162

Maintenance...Adjustments
5-117 LTO
#20 Position the tool in the frame-holder (Figure 3).
Figure 3
#21 Press . 
Result: The stylus grabs the round pattern and adjustment is started.
#22 When the adjustment is finished, check the measured values which are di-
splayed on the screen. 
Adjustment is correct when all the dots in front of the parameters are green. 
Note: If one or more dots are red, repeat the step by pressing the
key. If the problem cannot be solved, please contact your distributor.
#23 Remove the tool.
#24 Press . 
Result: The edger validates this adjustment and proceeds to the next one.
#25 When the icon is displayed, insert the rectangular pattern No. 14
04 191 on the pattern holder.
#26 Position the tool in the frame-holder (Figure 4).
Figure 4
#27 Press . 
Result: The stylus grabs the round pattern and adjustment is started.
#28 When the adjustment is finished, check the measured values which are di-
splayed on the screen. 
Adjustment is correct when all the dots in front of the parameters are green. 
Note: If one or more dots are red, repeat the step by pressing the
key. If the problem cannot be solved, please contact your distributor.
#29 Remove the tool.
#30 Press . 
Result: The edger validates this adjustment and the settings access screen 
is displayed.
#31 Press to leave the settings access screen.