manualshive.com logo in svg

Luneau Technology Briot emotion2, Инструкция по эксплуатации, Страница: 3 / 162

Поделиться
Скачать
Luneau Technology Briot emotion2 Скачать руководство пользователя страница 3

LTO

G

RAPHIC

 

CODES

Different graphic codes have been used in this manual to allow the user to distinguish between different types of 
information and easily spot the items which demand special attention (e.g. safety-related items).

The table below lists all the codes and describes them:

T

ABLE

 1: D

ESCRIPTION

 

OF

 

THE

 

PICTOGRAMS

Graphic 

code

Description

Vital warning.
Risk of human injury or material damage and machine malfunction. 
Follow the instructions carefully.

Vital recommendation.
Risk of machine damage or malfunction.
Follow the instructions carefully.

Vital preliminary action
Before undertaking any action, check that the machine is disconnected.

Electrical hazard.

Heavy component.
In particular, a second person is necessary to carry and move the machine.

Rotating component.
In particular, do not put your hands near the wheel unit.

Attaching component.
In particular, beware of the clamping shafts closing.

Protective gloves must be worn.
Especially for cleaning and changing the tanks.

Protective goggles must be worn.
Especially for cleaning and changing the tanks.

Overalls must be worn.
Especially for cleaning and changing the tanks.

Содержание Briot emotion2



































































































































































Отзывы:

Нет отзывов