Lunar Caravans 2016 Ariva, Руководство пользователя

Страница: 109 / 156

109
ALDE HEATING - QUICK START GUIDE
SHUTTING DOWN THE SYSTEM
To save energy, the control panel only
updates the boiler after the last adjustment is
made. Wait 10 secs before shutting down the
system to ensure the boiler is updated.
1. Press the Power button again. The screen
goes dark, the green LED is unlit. The
system is off.
SETUP
Most UK installations do not need setting up
in the Settings Menu, and use default factory
settings.
Restore default factory settings
Before using the system for the first time,
restore default factory settings. Your control
panel may have been tested by the dealer or
installer, and some settings may have been
changed.
1. Press Tool button to access the Settings
Menu (bottom right in Main Menu).
2. Press down arrow, until Reset button is
displayed.
3. Press the Reset button to proceed.
>
Setup Antimicrobial function
To actively kill Legionella , setup the
Antimicrobial function. At 2:00 every night,
the hot water will be heated to over 65
°
C for
30 mins. This further reduces the risk of
Legionella .
1. Press Tool button to access the Settings
Menu (bottom right in Main Menu).
2. Press down arrow, until Antimicrobial button
is displayed.
3. Press Antimicrobial button to proceed.
>
Setup Standby Screen for bedtime
The backlight on the Standby Screen can be
disturbing if the control panel is visible from
your bed. It can be inverted for white text on
black background.
1. Press Tool button to access the Settings
Menu (bottom right in Main Menu).
2. Press down arrow, until Backlight button is
displayed.
3. Press Backlight button, select Inverted to
proceed.
>
MAINTENANCE
The Alde control panel requires no
maintenance, other than cleaning of the
screen as needed. Use a microfibre cloth to
clean the touchscreen.
NB: Consider removing the Alde control
panel over winter, if the vehicle is to be kept
in storage and is susceptible to damp.
TROUBLE SHOOTING
Any error messages will be displayed on the
Standby Screen. Error messages can be
cleared by switching off 12 V supply to the
boiler for 10 secs.
The system is completely dead, the
control panel is blank
• Check the 20 mm T3.15 Amp glass fuse in
the boiler. This is located under the lid of the
black plastic service hatch, in a green
plastic fuse holder.
• Check the 12 V supply to the boiler, it
should be above 12 V.
• Check the 12 V cable is plugged into the
boiler. Check the cable is plugged into the
Alde control panel.
“Panel failure 1” & “Panel failure 2”
• Moisture is trapped in the control panel.
• Remove the Alde control panel from the
vehicle and air in a warm, dry place
overnight.