19
Description
A compact and powerful angle grinder intended for grinding of hard materials, like welding
joints, iron etc. The rear air outlet opening (Pos.3) through the handle reduces the risk that com-
pressed air with dirt particles, may blow in the face of the user. The rotation speed can be
adjusted by use of air regulator.
The tool is equipped with support handle (Pos.2) and safety lever (Pos.5), which prevents
unintentional start-up of the tool and automatically returns to the initial position after relea-
se. Equipped with a spindle stop (Pos.6) which facilitate when changing grinding discs.
Designed for grinding discs with spindle hub and cutting discs.
Health hazards
•
User of the tool should always take care of his and other persons’ safety. The user must
always use personal protective equipment.
•
Wear safety goggles, in order to reduce risk of eye injuries that could be caused by flying
sawdust, dust and sparkles.
•
Inhalation of dust can be harmful to health. Wear a suitable visor or breathing apparatus,
when working in a dusty environment.
•
In case of continuous work wear safety gloves protecting against the cold air.
•
In order to avoid eventual aural injuries, always use ear protection when using the tool.
•
The user must always pay attention to the fact that continuous use of rotating and impact pro-
ducing manual tools could result in baneful influence on health caused by the vibration.
•
Ergonomic load: Work with the tools related to recurrent, monotone movements and unfa-
vourable body positions may cause back, scruff, arm, marrowbone and other joint injuries.
54
Italiano
* Pressione aria 6,2 bar
Pos.
1. Protezione disco abrazivo
2. Maniglia di spinta
3. Appertura scarico aria
4. Raccordo ingresso aria
5. Leva di sicurezza
6. Blocco mandrino
Code. No.
20777-0108
20777-0207
Type...................................................................................................
AAG 115
AAG 125
Disco abrazivo ............................................................................mm
115x22
125x22
Filettatura mandrino ..................................................................UNF
M14
M14
Velocità di rotazione ................................................................r.p.m.
10 000
10 000
Pressione acustica ..................................................................dB (A)
82
82
Vibrazione ..................................................................................m/s
2
2.4
2.4
Diam. minimo del tubo flessibile...........................................pollice
3/8
3/8
Foro ingresso aria ..................................................................pollice
1/4
1/4
Consumo d’aria all’intensità di 100% *...................................l/min
450
450
Consumo d’aria all’intensità di 50% *.....................................l/min
225
225
Consumo d’aria all’intensità di 100% * .....................................cfm
15.9
15.9
Consumo d’aria all’intensità di 50% * .......................................cfm
7.9
7.9
Potenza ..........................................................................................W
485
485
Peso ...............................................................................................kg
1.9
1.9
Accessori:
Dado-flangia M14 .............................................................................
20777-0504
20777-0504
6.
1.
2.
3.
5.
4.
