5
TURNING THE UNIT ON AND OFF:
Your night vision unit has one-touch push-buttons. To turn the unit ON, press the
POWER Button (4) momentarily once. The LED Power Indicator (10) located on the
back of the unit should light up in green
color. Look through the eyecup (8) – you
should see the Welcome screen for a few seconds, followed by image. Even if the
image is not yet sharp, the unit is operating. To turn the unit OFF, press and hold
the POWER Button for 2 seconds. The image will disappear if you turn the unit off
correctly. We suggest to always replace the daytime color filter / protective lens
cover after the unit is turned off and no longer in use.
IMPORTANT: When turning the unit ON or when switching between various
modes (Video, Photo etc.) or when operating the unit with Wi-Fi stream activated,
it is normal to see some image flickering in the display. This is normal and does
not affect the unit. If the flickering does not disappear once the affecting
functions are no longer active, please re-start the unit. If conditions persist, please
contact us at:
for assistance.
ON-SCREEN DISPLAY ICONS:
Video Recording Counter
Video Resolution
Camera Mode
IR Power Level
Time Power source
Image Magnification
