Lumo BIO-MAX PLUS, Руководство пользователя и инструкция по установке

Страница: 4 / 29

4
The proper selection of a boiler should be based on a calculation of the thermal heat
demand of the building in which it is to be used. The type and rated thermal power of the
boiler is to be determined by the duly authorised system designer.
It should be noted that the sustained and trouble–free operation of Bio-max Plus central
heating boilers depends on their proper installation, the method of usage, and the timely and
correct performance of maintenance and service activities.
ATTENTION!
The initial start–up and the entirety of repairs may be conducted solely by the
Authorised Service Centre.
In order to enjoy full guarantee protection, and also to ensure your safety and comfort
of usage of our boiler, please send in the attached
INITIAL START–UP CARD
, properly
completed, stamped and signed by the Authorised Service Centre, to the following address:
LUMO TECHNIKA GRZEWCZA SP. Z O.O.
Ul. GŁÓWNA 51 B, KROSNO
62-050 MOSINA
WOJ. WIELKOPOLSKIE.
TELEPHONE/T48 61 8136 525; +48 61 8132 891
e-mail: serwis@lumo.com.pl
ATTENTION!
Failure to send in the INITIAL START–UP CARD, or the sending in of a CARD that has
been incompletely filled in or not signed, within two weeks of the date of initial start–
up shall void the guarantee for your newly purchased appliance, thus resulting in the
user being required to cover the entirety of costs of all and any repair work, including
the costs of travel of employees of the Authorised Service Centre.
The following conditions must be fulfilled prior to installation of the boiler:
The power of heaters should be appropriately selected for individual rooms. An
insufficient surface area of heaters will result in the building being inadequately
heated, and will also introduce conditions conducive to the deposition of boiler scale,
thereby leading to a reduction of the thermal efficiency of the boiler.
The heating system should be designed in accordance with the currently valid
regulations.
The heating system should not be constructed using pipes and heaters that are
internally contaminated.
Once constructed, the heating system should be purged repeatedly with clean water.
Bio-max Plus boilers can only be used in central heating systems in which the
working medium is clean water with a permissible maximum temperature of up to
100ºC and a maximum working pressure of up to 3 bar. The quality of the water used
in the system cannot deviate from the parameters stipulated for domestic water. The
addition of any agents, such as antifreeze additives, to the heating water shall be at