Luminite Alertex NXECSB, Руководство пользователя

Страница: 3 / 16

3 www.luminite.co.uk
Table of Contents
System Overview
System Overview 3
Master and Slave Units 4
Quick Start 4
How to Program the Unit 5
Change the Sounder Volume and Pattern 8
Initiate a Silent Test 9
How to Stop and Reset the Alarm 9
Setting Up the Genesis IP Masthead and Alertex PC App 11
Connect to the IP Masthead Receiver
11
Set-up Your Alertex Units 12
Set-up Email Alerts 13
Alertex is a wireless critical alert system that comprises a combination of
master and slave units that work together to create a mesh network. Up
to 64 units can operate together per site and each unit is totally wireless
and battery-powered. Each unit has the ability to act as a repeater and
can relay the transmission up to 16 times outside the initial wireless range
in order to navigate large or difficult sites.
Alertex can be used as a standalone system or can be monitored and
controlled from one centralised location by incorporating a Genesis IP
Masthead Receiver, allowing the use of the Alertex PC App.
When a Alertex call-point, keyfob or smoke/heat detector is activated,
the Alertex sounder and annunciator units will sound an alert and flash a
beacon light. Sounder units can play one of 32 different alert sounds, and
annunciator units can play a standard lockdown message or a bespoke
lockdown message that is chosen at the time of ordering.