Luminite Alertex NXECSB, Руководство пользователя

Страница: 11 / 16

11 www.luminite.co.uk
Important Notes
1. The Alertex system requires a 6 minute rest period after activation or
test due to this being a wireless system
2. Units are set to NOT be Call Repeaters by default. On larger sites, it is
recommended that at least one unit is set to Call Repeat
3. After the Alertex system is reset from a Master unit, the initially
activated call-point will still continue to flash and needs to be physically
reset using the black plastic key that comes supplied inside the unit
4. On very large sites, the Master unit may need to be used more than
once to fully reset the system. In this case, wait for 1 minute after the
initial reset request has been sent and perform the reset action again
5. Please take care when removing the lid of the Alertex unit as excessive
force may disconnect the wires from the sounder or annunciator /
beacon
6. Please take care when removing the top of the sounder or annunciator
/ beacon to change the sound pattern or volume as excessive force my
disconnect the wires within the unit
Connect to the IP Masthead Receiver
Setting up the Genesis IP Masthead and
Alertex PC APP
The Alertex PC App can be used to monitor and control the system from
one central location. You will need a hardwired power and ethernet
connection as well as a Windows computer running Windows 7 or above.
1. Download the Alertex PC App from the Luminite website, either from
the bottom of the Alertex page or from the Alertex section on the
Downloads page.
2. Ensure that the IP Masthead has the same SITE and SUBNET values
as the Alertex system